MultiScanner® HD900c

MultiScanner® HD900c vibrantly locates studs, metal, and live AC electrical wiring behind walls, floors, and ceilings. The advanced ColorTrip™ display lights green in stud scan, blue in metal, and red in live AC scan. Screen flashes, or lights, red to alert the presence of live AC in Stud, DeepScan®, and Metal Scan modes. A 4-mode switch makes it easy to change modes, while the ultra-bright display screen, SpotLite® Pointer, and audio tone all indicate the location of the target.

  • StudScan mode locates the center, edges, and direction of wood or metal studs up to 3⁄4 in. (19 mm) deep
  • DeepScan® mode doubles the scanning depth to 1 1⁄2 in. (38 mm)
  • WireWarning® detection indicates the presence of live, unshielded AC electrical wiring up to 2 in. (51 mm) deep in stud and metal scanning modes
  • Metal Scan mode locates non-ferrous metal, such as copper pipe, up to 1 1⁄2 in. (38 mm) deep,  and ferrous metal, such as rebar, up to 3 in. (76 mm) deep
  • AC Scan mode locates live, unshielded AC electrical wiring up to 2 in. (51 mm) deep
  • ACT™ (Auto Correcting Technology) automatically corrects common errors, such as when scanning begins over a stud
  • ColorTrip™ display with Target Spotlight indicates the direction and edge of the stud and illuminates when the center of the stud is detected
  • Low battery indicator for optimum performance
  • Signal Strength indicator helps to distinguish between shallow and deep targets
  • SpotLite® Pointer shines an arrow-shaped light on the wall to clearly indicate target location
  • Translucent base and illuminated “V” marker groove for more accurate marking of target location
  • Patented pivot pinch grip design promotes comfortable grip for more accurate scan results
hd900c
Demonstration

hd900_video
HD900c Video

 

Printable HD900c Instructions,
PDF Format
Printable DataSheet, PDF Format

Photo Gallery - coming soon

center metalthick electric metalelectrical