MultiScanner® HD800 OneStep®

MultiScanner® HD800 quickly and easily locates the center and edges of wood and metal studs and joists behind walls, floors, and ceilings. It also locates metal targets up to 3 in. (76 mm) deep. A 3-mode switch makes it easy to change functions, while the backlit display screen, SpotLite® Pointer, and audio tone all indicate the location of the target. The signal strength indicator helps to distinguish between shallow and deep targets.

  • StudScan mode locates the center, edges, and direction of wood or metal studs up to 3⁄4 in. (19 mm) deep
  • DeepScan® mode doubles the scanning depth to 1 1⁄2 in. (38 mm)
  • WireWarning® detection indicates the presence of live, unshielded AC electrical wiring up to 2 in. (51 mm) deep in stud and metal scanning modes
  • Metal Scan mode locates non-ferrous metal, such as copper pipe, up to 1 1⁄2 in. (38 mm) deep, and ferrous metal, such as rebar, up to 3 in. (76 mm) deep
  • ACT™ (Auto Correcting Technology) automatically corrects common errors, such as when scanning begins over a stud
  • Backlit LCD display with Target Spotlight indicates the direction and edge of the stud and illuminates when the center of the stud is detected
  • Low battery indicator for optimum performance
  • Signal Strength indicator helps to distinguish between shallow and deep targets
  • SpotLite® Pointer shines an arrow-shaped light on the wall to clearly indicate the center of the stud
  • Translucent base and illuminated “V” marker groove for more accurate marking of target location
MultiScanner® HD800 OneStep®
center metalthick electric metal