Studvision® Pro
Product PhotoStudVision® Pro stud finder finds wood and metal studs and joists up to 2" deep. It is the only stud finder that locates the exact center of a stud even if it is double or triple wide. The SpotLite® Pointing System displays a beam of light over the center of the stud. The easy-to-read Window-in-the-Wall LCD display shows you the entire width of the stud. High-impact case with rubberized grip.



Dimensions: 1.2 in. H x 3.0 in. W x 6.0 in. L
(3.0 cm H x 7.6 cm W x 15.2 cm L)
Weight: 6.4 oz. (181 g) without battery
Approximately 8.3 oz. (234 g) with battery
Battery Type: 9-volt alkaline (not included)
Battery Life: Two years at 20 minutes per day with alkaline battery
Depth: Wood or metal studs can be detected through drywall or plywood, or a combination of both, at depths up to 2" (51 mm) deep depending on wall composition.
Accuracy: Normal mode: The center and edges of a single or double wood or metal stud can be found within 1/8-inch (3 mm) through 5/8-inch (16 mm) drywall up to 1 inch (25 mm) deep.

Extreme Precision mode: The center and edges of a single or double stud can be found to within 1/8-inch (3 mm) through 5/8-inch (16 mm) drywall up to 2 inches (51 mm) deep.
Operating Temperature: 20° F to 120° F (-7° C to 49° C)
Storage Temperature: -20° F to 150° F (-29° C to 66° C)
Humidity: 80% RH (non-condensing)
Shock Resistance: Shock resistant from a maximum six-foot (1.8 m) drop onto concrete.
Water Resistance: Water and splash resistant, not waterproof.