All the MetalliScanner® metal finder does is detect metal—but it is very good at it.
Find rebar up to six inches deep through solid concrete! MetalliScanner® differentiates between steel and copper (or any magnetic vs. non-magnetic metal), and pinpoints both location and depth.
|Dimensions:||9 in. L x 4 in. W x 2 in. H
21.5 cm L x 9.5 cm W x 5.5 cm H
|Weight:||9.6 oz. (272 g) without battery|
|Battery Type:||9-volt alkaline (not included)|
|Accuracy:||Sensitivity: Center of #4 (1/2 in.) rebar or 1/2 in. copper pipe at a minimum spacing of 6 in. (15.24 cm) and a typical depth in concrete of 6 in. (15.24 cm) can be determined within ±1 in. (2.54 cm)
Depth: Depth of a piece of #4 (1/2 in.) rebar in concrete can be determined to a typical accuracy of +1 in. (deeper)/ -0 in. (shallower)
|Operating Temperature:||20° F to 120° F (-7° C to 49° C)
Maximum sensitivity at 60°F to 80°F (15°C to 27°C)
|Storage Temperature:||-20° F to 150° F (-29° C to 66° C)|
|Humidity:||80% RH (non-condensing)|
|Shock Resistance:||Shock resistant from a maximum 6 foot (1.8 m) drop onto concrete.|
|Water Resistance:||Water and splash resistant, not waterproof.|